Mac Os Pendrive Bootable Software


Make a Linux Bootable USB to Boot and Run Linux from a USB Flash Drive. Recommended YUMI – Multiboot USB Creator Updated: September 29, 2021 Legacy Classic Universal USB Installer – UUI Updated: August 29, 2021 Easily install your favorite Linux operating system to a bootable USB flash drive.

  • Apr 27, 2021 Plug the bootable installer into a Mac that is connected to the internet and compatible with the version of macOS you're installing. Turn on your Mac and continue to hold the power button until you see the startup options window, which shows your bootable volumes. Select the volume containing the bootable installer, then click Continue.
  • Apr 21, 2021 Mac Os Pendrive Bootable Software When OS X shipped on a DVD a good number of years ago, you always had the convenience of a bootable installer—an OS X installer that could be used to boot your Mac if its own drive was having problems.

Previously, on Guiding Tech, we have covered how you can create bootable USB drives for Windows 7, Windows 8 and AVG rescue disc. In all those methods, we used different tools to create the bootable drive and it was a USB pen drive each for those operating systems. Today, I will tell you about an interesting tool called YUMI that will help you create a multi-boot USB pen drive meaning you could boot multiple operating systems from one single USB pen drive.

YUMI is like the mother of all bootable USB creation tools. With YUMI, you can create a multiple booting pen drive with several Linux distros, Windows operating systems and lots of other bootable tools like antivirus rescue disc and clean-up tools. That’s not all, YUMI will create a bootable disk with a menu to help you select the distros easily at the time of boot.

So let’s see how you to create a multi-boot pen drive with YUMI.

Creating Multi-boot USB Drive with YUMI

Step 1: Plug in the USB drive you wish to make bootable to your computer.

Step 2: Download and run YUMI portable tool with administrative privilege. The tool will ask you to agree to some terms and conditions before it starts. The interface of YUMI is self-explanatory. Just select the drive letter of the USB drive you have plugged in and select the type of bootable USB drive you wish to create. It’s advisable to back up all the important data from the USB drive and check the option format drive to clean the drive completely before starting.

Mac Os Pen Drive Bootable Softwares

Step 3: If your desired distro is not available in the list, scroll down to select try an unlisted ISO. I tried that option for Windows 8, and it worked. If an ISO of a particular operating system or tool is not available in your computer, YUMI will provide you with the download link from where you can download the stuff. Just select the option Download the ISO. If you already have the ISO in your hard drive, browse for it and press the Create button.

Once the tool has finished with the current ISO, it will ask you whether you want to add more distros to your USB drive. Just remember to uncheck the format option before you move on to the next ISO. Repeat the process to add consecutive booting image to your USB drive.

Now when you restart your computer and select the boot from USB device in the BIOS booting option, YUMI boot menu will load with the list of all the available operating system you can boot from the USB drive.

YUMI makes it very simple to create multi-boot USB pen drive with lots of distros and system tools, all you need is a pen drive that can accommodate all these. That shouldn’t be a worry considering you get pen drives from 1 GB to 32 GB (probably more) these days.

So, how do you like YUMI? Useful, isn’t it?

The above article may contain affiliate links which help support Guiding Tech. However, it does not affect our editorial integrity. The content remains unbiased and authentic.

Read Next

How to Use Multi-Windows on Windows 11

When OS X shipped on a DVD a good number of years ago, you always had the convenience of a bootable installer—an OS X installer that could be used to boot your Mac if its own drive was having problems. But to install or reinstall a recent version of OS X, you must either download a non-bootable installer from the Mac App Store or (via OS X’s invisible, bootable recovery partition) download 6GB of installer data from Apple’s servers during the installation process. In other words, you no longer have the same safety net or convenience.

Because of this, I recommend creating your own bootable El Capitan (OS X 10.11) installer drive on an external hard drive or USB thumb drive. If you need to install El Capitan on multiple Macs, using a bootable installer drive is faster and more convenient than downloading or copying the entire installer to each computer. If you want to erase the drive on a Mac before installing El Capitan, or start over at any time, you can use a dedicated installer drive to boot that Mac, erase its drive, and then install the OS (and subsequently restore whatever data you need from your backups). And if your Mac is experiencing problems, a bootable installer drive makes a handy emergency disk.

Rufus usb bootable download

Plug the bootable installer into a Mac that is connected to the internet and compatible with the version of macOS you're installing. Press and hold the Option (Alt) ⌥ key immediately after turning on or restarting your Mac. Release the Option key when you see a dark screen showing your bootable volumes. If you have a Mac system but want to run Windows on that system, you will need to create Windows 10 bootable USB on Mac for PC. Even if the Mac system uses Mac OS, you can still run Windows on it this way. But to install or reinstall a recent version of OS X, you must either download a non-bootable installer from the Mac App Store or (via OS X’s invisible, bootable recovery partition) download 6GB. UNetbootin is a free, open source utility that allows you to create bootable USB drives on Windows, Linux, and Mac OS X. If you’ve downloaded Windows 10 ISO image, here is how you can create a bootable Windows installer USB on Mac using UNetbootin. Plug a USB drive into your Mac and open Disk Utility.

(OS X Recovery lets you repair your drive and reinstall OS X, but to perform the latter task, you must wait—each time you use it—for the entire 6GB of installer data to download. At best, that’s a hassle; at worst, it’s hours of waiting before you can get started.)

As with previous versions of OS X, it’s not difficult to create a bootable installer drive, but it’s not obvious, either. I show you how, below.

Keep the installer safe

Like all recent versions of OS X, El Capitan is distributed through the Mac App Store: You download an installer app (called Install OS X El to your Applications folder. In this respect, the OS X installer is just like any other app you buy from the Mac App Store. However, unlike any other app, if you run the OS X installer from that default location, the app deletes itself after it’s done installing OS X.

If you plan to use the OS X installer on other Macs, or—in this case—to create a bootable installer drive, be sure to copy the installer to another drive, or at least move it out of the Applications folder, before you use it to install the OS on your Mac. If you don’t, you’ll have to redownload the installer from the Mac App Store before you can use the instructions below.

What you need

To create a bootable El Capitan installer drive, you need the El Capitan installer from the Mac App Store and a Mac-formatted drive that’s big enough to hold the installer and all its data. This can be a hard drive, a solid-state drive (SSD), a thumb drive, or a USB stick—an 8GB thumb drive is perfect. Your drive must be formatted as a Mac OS Extended (Journaled) volume with a GUID Partition Table. (Follow this tutorial to properly format the drive if you’re using OS X Yosemite or older. If you’re using OS X El Capitan, use these instructions.)

Your OS X user account must also have administrator privileges.

Apple’s gift: createinstallmedia

Mac Os Usb Bootable Software

In my articles on creating a bootable installer drive for older versions of OS X, I provided three, or even four, different ways to perform the procedure, depending on which version of OS X you were running, your comfort level with Terminal, and other factors. That approach made sense in the past, but a number of the reasons for it no longer apply, so this year I’m limiting the instructions to a single method: using OS X’s own createinstallmedia tool.

Starting with Mavericks, the OS X installer hosts a hidden Unix program called createinstallmedia specifically for creating a bootable installer drive. Using it requires the use of Terminal, but createinstallmedia works well, it’s official, and performing the procedure requires little more than copying and pasting.

Mac Os Pendrive Bootable Software For Windows 7

The only real drawback to createinstallmedia is that it doesn’t work under OS X 10.6 Snow Leopard—it requires OS X 10.7 Lion or later. Though it’s true that some Macs still running Snow Leopard can upgrade to El Capitan, I think it’s safe to assume that most people installing OS X 10.11 will have access to a Mac running 10.7 or later.

Macos catalina vmware image download. (If you absolutely refuse to go near Terminal, an El Capitan-compatible version of DiskMaker X is now available, although I haven’t yet had the chance to test it.) Check if mysql server is running mac.

Making the installer drive

Mac Os Bootable Usb Software Usb

  1. Connect to your Mac a properly formatted 8GB (or larger) drive, and rename the drive Untitled. (The Terminal commands I provide here assume that the drive is named Untitled. If the drive isn’t named Untitled, the procedure won’t work.)
  2. Make sure the El Capitan installer (or at least a copy of it), called Install OS X El, is in its default location in your main Applications folder (/Applications).
  3. Select the text of the following Terminal command and copy it. Note that the window that displays the command scrolls to the right.
  4. Launch Terminal (in /Applications/Utilities).
  5. Warning: This step will erase the destination drive or partition, so make sure that it doesn’t contain any valuable data. Paste the copied command into Terminal and press Return.
  6. Type your admin-level account password when prompted, and then press Return.
  7. You may see the message “To continue we need to erase the disk at /Volumes/Untitled. If you wish to continue type (Y) then press return:” If so, type the letter Y and then press Return. If you don’t see this message, you’re already set.

Mac Os Bootable Usb Creator Software

The Terminal window displays createinstallmedia’s progress as a textual representation of a progress bar: Erasing Disk: 0%… 10 percent…20 percent… and so on. You also see a list of the program’s tasks as they occur: Copying installer files to disk…Copy complete.Making disk bootable…Copying boot files…Copy complete. The procedure can take as little as a couple minutes, or as long as 20 to 30 minutes, depending on how fast your Mac can copy data to the destination drive. Once you see Copy Complete. Done., as shown in the screenshot above, the process has finished.

Createinstallmedia will have renamed your drive from Untitled to Install OS X El Capitan. You can rename the drive (in the Finder) if you like—renaming it won’t prevent it from working properly.

Mac Os Usb Boot Software

Booting from the installer drive

Mac Os Bootable Usb Software Recovery Tool

Mac Os Bootable Usb Software For Windows

You can boot any El Capitan-compatible Mac from your new installer drive. First, connect the drive to your Mac. Then, restart your Mac (or, if it’s currently shut down, start it up) while holding down the Option key. When OS X’s Startup Manager appears, select the installer drive and then click the arrow below it to proceed with startup. (Alternatively, if your Mac is already booted into OS X, you may be able to choose the installer drive in the Startup Disk pane of System Preferences, and then click restart. However, sometimes OS X installer drives don’t appear in the Startup Disk window.)

Mac Os Pendrive Bootable Software

Once booted from your installer drive, you can perform any of the tasks available from the OS X installer’s special recovery and restore features. In fact, you’ll see the same OS X Utilities screen you get when you boot into OS X Recovery—but unlike with recovery mode, your bootable installer includes the entire installer.